diff options
Diffstat (limited to 'lab4/Nexys3.ucf')
| -rw-r--r-- | lab4/Nexys3.ucf | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/lab4/Nexys3.ucf b/lab4/Nexys3.ucf new file mode 100644 index 0000000..92129cb --- /dev/null +++ b/lab4/Nexys3.ucf @@ -0,0 +1,29 @@ +## This file is a general .ucf for Nexys3 rev B board
+## To use it in a project:
+## - remove or comment the lines corresponding to unused pins
+## - rename the used signals according to the project
+
+##Clock signal
+Net "clk" LOC=V10 | IOSTANDARD=LVCMOS33;
+Net "clk" TNM_NET = sys_clk_pin;
+TIMESPEC TS_sys_clk_pin = PERIOD sys_clk_pin 100000 kHz;
+
+Net "rst" LOC = B8 | IOSTANDARD = LVCMOS33; #Bank = 0, pin name = IO_L33P, Sch name = BTNS
+
+
+## Pic USB-HID interface
+Net "PS2KeyboardClk" LOC = L12 | IOSTANDARD = LVCMOS33 | PULLUP; #Bank = 1, pin name = IO_L40P_GCLK11_M1A5, Sch name = PIC-SCK1
+Net "PS2KeyboardData" LOC = J13 | IOSTANDARD = LVCMOS33 | PULLUP; #Bank = 1, pin name = IO_L39P_M1A3, Sch name = PIC-SDI1
+
+## VGA Connector
+NET "vgaRed<0>" LOC = U7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L43P, Sch name = RED0
+NET "vgaRed<1>" LOC = V7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L43N, Sch name = RED1
+NET "vgaRed<2>" LOC = N7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L44P, Sch name = RED2
+NET "vgaGreen<0>" LOC = P8 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L44N, Sch name = GRN0
+NET "vgaGreen<1>" LOC = T6 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L45P, Sch name = GRN1
+NET "vgaGreen<2>" LOC = V6 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L45N, Sch name = GRN2
+NET "vgaBlue<1>" LOC = R7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L46P, Sch name = BLU1
+NET "vgaBlue<2>" LOC = T7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L46N, Sch name = BLU2
+
+NET "Hsync" LOC = N6 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L47P, Sch name = HSYNC
+NET "Vsync" LOC = P7 | IOSTANDARD = LVCMOS33; # Bank = 2, pin name = IO_L47N, Sch name = VSYNC
|